Dashboard
Pre Production Report
| Date | Softening Point | Product |
|---|---|---|
| 2025-11-05 13:00:38 | 98 | underlayment |
| 2025-11-04 13:59:44 | 98 | underlayment |
| 2025-11-04 11:51:22 | 92 | underlayment |
| 2025-11-03 12:11:49 | 130 | cap-sheet |
| 2025-10-30 11:35:57 | 104 | underlayment |
| 2025-10-29 11:43:15 | 100 | underlayment |
| 2025-10-28 11:49:33 | 114 | high-temperature |
| 2025-10-28 11:49:10 | 114 | underlayment |
| 2025-10-23 12:06:30 | 92 | underlayment |
| 2025-10-22 11:36:32 | 98 | underlayment |
| 2025-10-21 11:40:33 | 102 | underlayment |
| 2025-10-15 12:33:22 | 98 | underlayment |
| 2025-10-14 11:44:03 | 97 | underlayment |
| 2025-10-09 11:55:45 | 100 | underlayment |
| 2025-10-08 12:06:21 | 95 | underlayment |
| 2025-10-07 11:45:35 | 96 | underlayment |
| 2025-10-06 11:54:57 | 107 | high-temperature |
| 2025-10-02 11:50:00 | 96 | underlayment |
| 2025-10-01 13:14:02 | 100 | underlayment |
| 2025-09-30 11:51:59 | 100 | underlayment |
Pre Production Inpsection
| Batch | Boiler Temperature | Mixer Temperature | Coating Tank Heaters | Coating Tank Oil | Water Circulation | Fiberglass in shaft | RF in shaft | Sand Ready | Fiberglass properly installed |
|---|---|---|---|---|---|---|---|---|---|
| 11/04/2025 | 177 | 160 | yes | yes | yes | yes | yes | yes | yes |
| 11/03/2025 | 230 | 155 | yes | yes | yes | yes | yes | no | yes |
| 11/03/2025 | 245 | 145 | yes | yes | no | yes | yes | no | yes |
| 10/22/2025 | 230 | 155 | yes | yes | yes | yes | yes | yes | yes |
| 10/29/2025 | 217 | 145 | yes | yes | yes | yes | yes | yes | yes |
| 10/27/2025 | 217 | 145 | no | no | yes | yes | yes | no | yes |
| 10/22/2025 | 202 | 155 | yes | yes | yes | yes | yes | yes | yes |
| 10/22/2025 | 217 | 150 | yes | yes | yes | yes | yes | yes | yes |
| 10/21/2025 | yes | yes | yes |
In Process Inpsection
| Date | Product | Back Surface Integrity | Front Surface Integrity | Side Lap Integrity (if applicable) | Winding Integrity | Thickness Left Side (mm) | Thickness Right Side (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| 11/05/2025 | UL | pass | pass | pass | pass | 0.9 | 1 | 23 |
| 11/04/2025 | UL | fail | pass | pass | pass | 1.0 | 1 | 24 |
| 11/04/2025 | LAMA BASE SA | pass | pass | pass | 1.2 | 1.2 | 28 | |
| 11/04/2025 | LAMA BASE SA | pass | pass | pass | pass | 1.2 | 1.2 | 28 |
| 11/04/2025 | LAMA BASE SA | pass | fail | pass | pass | 1.2 | 1.1 | 29 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 3.6 | 3.8 | 38 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 3.8 | 3.6 | 38 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 3.6 | 3.7 | 37 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 3.6 | 3.5 | 37 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 3.6 | 3.6 | 37 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 3.4 | 3.7 | 36 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 3.9 | 3.4 | 36 |
| 11/03/2025 | CAP TORCH | pass | pass | pass | pass | 4.4 | 3.8 | 37 |
| 11/03/2025 | CAP TORCH | pass | pass | fail | pass | 3.3 | 3.4 | 32 |
| 10/30/2025 | STAR | pass | pass | pass | pass | 1.1 | 1.1 | 26 |
| 10/30/2025 | STAR | pass | pass | pass | pass | 1.1 | 1.1 | 27 |
| 10/30/2025 | UL | pass | pass | pass | pass | 1.3 | 1.3 | 31 |
| 10/30/2025 | Primo Guard | fail | pass | pass | pass | 1.3 | 1.3 | 31 |
| 10/30/2025 | 29 |
Batch Preparation
| Date | Material | Mixer Temperature | Time | Quantity | Completed By |
|---|---|---|---|---|---|
| 2025-11-13 10:25:01 | filler | 165 | 1:15 | 7600 | Mehmet Abdul vajid |
| 2025-11-13 10:24:04 | oil | 165 | 1:15 | 195 | Mehmet Abdul vajid |
| 2025-11-12 12:04:55 | oil | 165 | 1:15 | 195 | Mehmet Abdul |
| 2025-11-12 12:04:03 | filler | 165 | 1:15 | 7600 | Mehmet Abdul |
| 2025-11-07 12:07:06 | filler | 155 | 1:15 | 7700 | Mehmet moammd |
| 2025-11-07 12:05:45 | oil | 155 | 1:15 | 195 | Mehmet Mohammad |
| 2025-11-04 12:02:22 | filler | 180 | 1:30 | 6000 | Mehmet vajid Mohammad |
| 2025-11-04 12:01:20 | oil | 180 | 1:30 | 150 | Mehmet and vajid |
| 2025-11-03 10:33:24 | filler | 170 | 1:15 | 7800 | Mehmet and Mohammad |
| 2025-11-03 10:31:23 | oil | 170 | 1:15 | 510 | Mehmet and Mohammad |
| 2025-10-30 11:03:49 | oil | 170 | 1:15 | 156 | Mehmet Mohammd vajid |
| 2025-10-30 11:02:34 | filler | 170 | 1:00 | 6084 | Mehmet vajid Mohamed |
| 2025-10-29 11:05:38 | oil | 165 | 4:00 | 6084 | Mehmet and Mohammd |
| 2025-10-29 11:03:24 | filler | 165 | 4.00 | 156 | Mehmet and Mohammed |
| 2025-10-29 02:29:51 | filler | 150 | 10:30pm | 1 | Alhasan |
| 2025-10-28 11:05:13 | filler | 160 | 1:20 | 4440 | Mehmet and vajid and Mohammd |
| 2025-10-28 11:04:11 | oil | 160 | 1:20 | 600 | Mehmet and valid |
| 2025-10-24 09:11:15 | filler | 165 | 1:20 | 4440 | Mehmet and sakarya |
| 2025-10-24 09:09:00 | oil | 165 | 1:20 | 600 | Mehmet and sakarya |
| 2025-10-24 02:50:01 | rf | 150 | 17:00 | 6 | Audai and Milan |
| 2025-10-24 02:48:58 | fg | 160 | 16:00 | 1 | Hasan and Bhautic |
| 2025-10-24 02:44:22 | sbs | 150 | 17;00 | 48bags LG | Ahmad and Hasan |
| 2025-10-24 02:43:06 | asphalt | 160 | 16:00 | 6000 | Audai |
| 2025-10-24 02:42:20 | mixer-heating-valve | 160 | 16:00 | The heating is turned on only through the mixer | Audai |
| 2025-10-23 11:03:31 | filler | 155 | 1:15 | 5070 | Mehmet and vajid and abdul |
Post Process Inpsection
| Batch | Product | Winding Integrity | Skid Integrity | Correct Label | Batch # Displayed | Shrink Wrap Integrity |
|---|---|---|---|---|---|---|
| 11/03/2025 | CAP TORCH | fail | pass | pass | pass | pass |
| 11/03/2025 | CAP TORCH | fail | pass | pass | pass | pass |
| 10/30/2025 | ul | pass | pass | pass | pass | pass |
| 10/30/2025 | sw | pass | pass | pass | pass | pass |
| 10/30/2025 | ul | pass | pass | pass | pass | pass |
| 10/30/2025 | ul | pass | pass | pass | pass | pass |
| 10/30/2025 | ul | pass | pass | pass | pass | pass |
| 10/30/2025 | ul | pass | pass | pass | pass | pass |
| 10/29/2025 | sw | pass | pass | pass | pass | pass |
| 10/29/2025 | sw | pass | pass | pass | pass | pass |
| 10/29/2025 | sw | pass | pass | pass | pass | pass |
| pass |
Production Report
| Batch | Product | Thickness | Grade | Quantity |
|---|---|---|---|---|
| 10/30/2025 | Grade B | 1.2mm | LAMA UL | 60 |
| 10/30/2025 | Grade A | 1.35mm | PRIMO GUARD | 150 |
| 10/30/2025 | Grade A | 1.2mm | STARWRAP | 200 |
| 10/30/2025 | Grade A | 1mm | LAMA UL | 270 |
| 10/29/2025 | Grade B | 1.2mm | LAMA UL | 25 |
| 10/29/2025 | Grade A | 1mm | LAMA UL | 25 |
| 10/29/2025 | Grade A | 1.2mm | LAMA UL | 30 |
| 10/29/2025 | Grade A | 1.2mm | STARWRAP | 480 |
| 10/29/2025 | Grade A | 1.2mm | STARWRAP | 480 |
| 10/29/2025 | Grade A | 1.2mm | STARWRAP | 480 |
| 10/29/2025 | Grade A | 1.2mm | STARWRAP | 480 |
| 10/29/2025 | Grade A | 1.2mm | STARWRAP | 280 |
| 10/28/2025 | Grade B | 1.2mm | PRIMO HT | 30 |
| 10/28/2025 | Grade A | 1.2mm | LAMA HT | 270 |
| 10/28/2025 | Grade A | 1.2mm | PRIMO HT | 120 |
| 10/24/2025 | Grade B | 1.2mm | PRIMO HT | 25 |
| 10/24/2025 | Grade A | 1.2mm | PRIMO HT | 420 |
| 10/24/2025 | Grade A | 1.2mm | LAMA HT | 60 |
| 10/23/2025 | Grade B | 1.2mm | LAMA UL | 20 |
| 10/23/2025 | Grade A | 1mm | LAMA UL | 225 |
| 10/23/2025 | Grade A | 1.2mm | LAMA UL | 270 |
| 10/23/2025 | Grade A | 1.2mm | LAMA HT | 60 |
| 10/22/2025 | Grade A | 1.35mm | PRIMO GUARD | 30 |
| 10/22/2025 | Grade B | 1.2mm | LAMA UL | 25 |
| 10/22/2025 | Grade A | 1mm | LAMA UL | 30 |
| 10/22/2025 | Grade A | 1.2mm | LAMA UL | 150 |
| 10/22/2025 | Grade A | 1.2mm | STARWRAP | 570 |
| 10/21/2025 | Grade B | 1.2mm | LAMA UL | 20 |
| 10/21/2025 | Grade A | 1.2mm | STARWRAP |
CLOSE SEARCH